Operates With a 3.3-V Supply Low Power Replacement for the PCA82C250 Footprint Bus/Pin ESD Protection Exceeds 16 kV HBM High Input Impedance Allows for 120 Nodes on a Bus Controlled Driver Output Transition Times for Improved Signal Quality on the SN65HVD230 and SN65HVD231 Unpowered Node Does Not Disturb the Bus Compatible With the Requirements of the ISO 11898 Standard Low-Current SN65HVD230 Standby Mode 370 µA Typical Low-Current SN65HVD231 Sleep Mode 40 nA Typical Designed for Signaling to 1 Megabit/Second (Mbps) Thermal Shutdown Protection Open-Circuit Fail-Safe Design Glitch-Free Power-Up and Power-Down Protection for Hot-Plugging Applications

The signaling rate of a line is the number of voltage transitions that are made per second expressed in the units bps (bits per second).

Motor Control Industrial Automation Basestation Control and Status Robotics Automotive UPS Control

Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet. is a trademark of Texas Instruments.

PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of the Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters.

These devices have limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam during storage or handling to prevent electrostatic damage to the MOS gates.

The SN65HVD230, SN65HVD231, and SN65HVD232 controller area network (CAN) transceivers are designed for use with the Texas Instruments TMS320Lx240xTM; 3.3-V DSPs with CAN controllers, or with equivalent devices. They are intended for use in applications employing the CAN serial communication physical layer in accordance with the ISO 11898 standard. Each CAN transceiver is designed to provide differential transmit capability to the bus and differential receive capability to a CAN controller at speeds to 1 Mbps. Designed for operation in especially-harsh environments, these devices feature cross-wire protection, loss-of-ground and overvoltage protection, overtemperature protection, as well as wide common-mode range. The transceiver interfaces the single-ended CAN controller with the differential CAN bus found in industrial, building automation, and automotive applications. It operates over to 7-V common-mode range on the bus, and it can withstand common-mode transients V. On the SN65HVD230 and SN65HVD231, pin 8 provides three different modes of operation: high-speed, slope control, and low-power modes. The high-speed mode of operation is selected by connecting pin 8 to ground, allowing the transmitter output transistors to switch on and off as fast as possible with no limitation on the rise and fall slopes. The rise and fall slopes can be adjusted by connecting a resistor to ground at pin 8, since the slope is proportional to the pin's output current. This slope control is implemented with external resistor values k, to achieve a 15-V/µs slew rate, k, to achieve a 2-V/µs slew rate. See the Application Information section of this data sheet. The circuit of the SN65HVD230 enters a low-current standby mode during which the driver is switched off and the receiver remains active if a high logic level is applied to pin 8. The DSP controller reverses this low-current standby mode when a dominant state (bus differential voltage 900 mV typical) occurs on the bus. The unique difference between the SN65HVD230 and the SN65HVD231 is that both the driver and the receiver are switched off in the SN65HVD231 when a high logic level is applied to pin 8 and remain in this sleep mode until the circuit is reactivated by a low logic level on pin 8. The Vref pin 5 on the SN65HVD230 and SN65HVD231 is available a VCC/2 voltage reference. The is a basic CAN transceiver with no added options; pins 5 and 8 are NC, no connection. AVAILABLE OPTIONS (1)

PART NUMBER SN65HVD232 (1) LOW POWER MODE Standby mode Sleep mode No standby or sleep mode INTEGRATED SLOPE CONTROL Yes No Vref PIN Yes 85°C TA MARKED AS: VP231 VP232

For the most current package and ordering information, see the Package Option Addendum at the end of this document, or see the TI web site at www.ti.com.

DRIVER SN65HVD231) (1) INPUT L H Open 2 RS V(Rs) V X V(Rs) > 0.75 VCC OUTPUTS CANH CANL BUS STATE Dominant Recessive

H = high level; L = low level; X = irrelevant; ? = indeterminate; Z = high impedance Submit Documentation Feedback

H = high level; L = low level; Z = high impedance RECEIVER (SN65HVD230) (1) DIFFERENTIAL INPUTS VID V < VID 0.9 V VID 0.5 V Open RS OUTPUT

H = high level; L = low level; X = irrelevant; ? = indeterminate RECEIVER (SN65HVD231) (1) DIFFERENTIAL INPUTS VID V < VID 0.9 V VID V X Open V(Rs) > 0.75 VCC V < V(Rs) < 0.75 VCC X V(Rs) V RS OUTPUT

H = high level; L = low level; X = irrelevant; ? = indeterminate RECEIVER (SN65HVD232) (1) DIFFERENTIAL INPUTS VID V < VID 0.9 V VID 0.5 V Open OUTPUT

H = high level; L = low level; X = irrelevant; ? = indeterminate TRANSCEIVER MODES (SN65HVD230, SN65HVD231) V(Rs) > 0.75 VCC k to ground V(Rs) 1 V OPERATING MODE Standby Slope control High speed (no slope control)

TERMINAL NAME CANL CANH D GND R NO. Low bus output High bus output Driver input Ground Receiver output SN65HVD230, SN65HVD231 DESCRIPTION

DIT4096IPW : Digital Audio Transmitters ti DIT4096, 96kHz Digital Audio Transmitter

SN74LVC1G123YEPR : Single Retriggerable Monostable Multivibrator With Schmitt-trigger Inputs

PTH04T220WAS : The PTH04T220/221W is the lower input voltage (2.2V to 5.5V) version of the PTH08T220/221W (4.5V to 14V), 16-A rated, non-isolated power module. These modules represent the 2nd generation of the popular PTH series power modules and include a reduced footprint and additional features. The PTH04T221W

CDCV850I : 2.5-v Phase LOCK LOOP Clock Driver WITH 2 LINE Serial Interface

TLV2217-33KCE3 : Low-dropout Fixed-voltage Regulatoes

TL592BPE4 : IC, VIDEO DIFF AMP, SINGLE, 50MHZ, DIP-8 Specifications: Gain Bandwidth: 50MHz ; Slew Rate: - ; No. of Amplifiers: 1 ; Output Current: 4mA ; Amplifier Output: Differential ; Operating Temperature Range: 0°C to +70°C ; Supply Voltage Range: ± 3V to ± 8V ; Amplifier Case Style: DIP ; No. of Pins: 8 ; MSL: -

74AC16373DLRG4 : D-Type (3-State) Latches ti 74AC16373, 16-Bit Transparent D-type Latches With 3-State Outputs

TPA2054D4AYZKT : Linear - Amplifier - Audio Integrated Circuit (ics) Class D Tape & Reel (TR) 2.5 V ~ 5.5 V; IC AMP AUDIO HDPHE 1.4W 25DSBGA Specifications: Package / Case: 25-UFBGA, DSBGA ; Type: Class D ; Output Type: 2-Channel (Stereo) with Stereo Headphones ; Voltage - Supply: 2.5 V ~ 5.5 V ; Packaging: Tape & Reel (TR) ; Features: Depop, Differential Inputs, I&sup2;C, Input Multiplexer, Mute, Shutdown, Volume Control ; Max O

TLC7528ENE4 : Data Acquisition - Digital To Analog Converter (dac) Integrated Circuit (ics) Tube Single Supply; IC DUAL 8-BIT MLTPLY DAC 20-DIP Specifications: Data Interface: Parallel ; Number of Bits: 8 ; Operating Temperature: -40°C ~ 85°C ; Package / Case: 20-DIP (0.300', 7.62mm) ; Packaging: Tube ; Voltage Supply Source: Single Supply ; Settling Time: 100ns ; Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant

CC3220SF12ARGKT : RF Microcontrollers - MCU Single-Chip Wireless MCU

7MBP100RTB060 : . Temperature protection provided by directly detecting the junction temperature of the IGBTs Low power loss and soft switching High performance and high reliability IGBT with overheating protection Higher reliability because of a big decrease in number of parts in built-in control circuit Absolute maximum ratings(at Tc=25°C unless otherwise specified).

VS3V257 : 3.3V Quad 2:1 Mux/demux Voltage Translator. Applications to 2.5V translation to 1.8V translation Hot-Swapping Logic replacement Memory bank, video, and audio switching The is a high-speed LVTTL­compatible Quad 2:1 multiplexer/demultiplexer. The VS3V257 contains four mux/demux channels, with a common path control (S) and active low enable (/E). The low ON resistance of the VS3V257 allows inputs.

F330AR : Hcmos 3.2x2.5mm 3.3V SMD Oscillator. 3.3V Operation HCMOS Output Standby Function Tape and Reel (2,000 pcs. STD) PART NUMBER SELECTION Learn More - Internet Required Frequency Range (Fo) Storage Temperature Range (Tstg) Supply Voltage (Vdd) Input Current (Idd) (No Load) ~ 32.000 MHz ~ 50.000 MHz Output Symmetry (50% Vdd) Rise Time ~ 90% Vdd)(Tr) Fall Time ~ 10% Vdd)(Tf) Output Voltage.

MPC8377EWLANA : Rf Evaluation And Development Kits, Board Rf/if And Rfid; ACCESS POINT/ROUTER MPC8377. s: Type: - ; Supplied Contents: - ; For Use With/Related Products: - ; Frequency: - ; Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant.

RK09D1130C3C : Potentiometers 10 KOhms 30%. s: Manufacturer: ALPS ; RoHS: Details ; Product: Potentiometer ; Resistance: 10 KOhms ; Tolerance: 30 % ; Shaft Type: Flatted / D ; Shaft Length: 25 mm ; Mounting Style: Through Hole ; Termination Style: Pin ; Operating Temperature Range: - 10 C to + 70 C ; Packaging: Bulk ; Type: Snap In.

SRPT659544/BLK : Switch Hardware SEGMENT WHEEL BLACK. s: Manufacturer: Apem ; Product Category: Switch Hardware ; RoHS: Details ; For Use With: DIP Switches ; Type: Wheel, Segment ; Designed for: PT65 Series ; Color: Black ; Termination Style: Snap In.

FZT795ATA : Transistors Bipolar (BJT) PNP High Voltage. s: Manufacturer: Diodes Inc. ; Product Category: Transistors Bipolar (BJT) ; RoHS: Details ; Transistor Polarity: PNP ; Collector- Emitter Voltage VCEO Max: 140 V ; Emitter- Base Voltage VEBO: - 5 V ; Maximum DC Collector Current: 0.5 A ; Maximum Operating Frequency: 100 MHz ; Maximum Operating Temperature:.

GOM-802 : DC MILLI OHMMETER, 4 WIRE, 3MOHM. s: Wire Connection: 4-Wire ; Resistance Measuring Range: 0.030ohm / 0.3ohm / 3ohm / 30ohm / 300ohm / 3kohm / 30kohm / 300kohm / 3Mohm ; Resolution (ohm): 100ohm ; Test Current: 1A ; Accuracy: ± 0.1% ; External Height: 91mm ; External Width: 251mm ; External Depth: 291mm ; Weight: 3kg.

172278 : Panel Mount Coaxial, Rf - Adapter Connectors, Interconnect Panel Mount; CONN ADAPTER N JACK-JACK PNL MNT. s: Convert From (Adapter End): N Jack, Female Socket ; Convert To (Adapter End): N Jack, Female Socket ; : Flange, Square ; Style: Straight ; Mounting Type: Panel Mount ; Impedance: 50 Ohm ; Adapter Type: Jack to Jack ; Center Gender: Female to Female.

H1AXH-2036G : Socket to Cable Rectangular Cable Assembly 3.00' (914.40mm) -; IDC CABLE - HSC20H/AE20G/X. s: Connector Type: Socket to Cable ; Number of Positions: 20 ; Contact Finish: Gold ; Number of Rows: 2 ; : - ; Color: Gray, Ribbon ; Length: 3.00' (914.40mm) ; Usage: - ; Shielding: Unshielded ; Contact Finish Thickness: 15µin (0.38µm) ; Cable Termination: IDC ; Pitch.

BAV199Q-13-F : SIGNAL DIODE. s: Diode Type: General Purpose. Surface Mount Package Ideally Suited for Automated Insertion Very Low Leakage Current Lead, Halogen and Antimony Free, RoHS Compliant 'Green' Device (Notes 1 and 2) Qualified to AEC-Q101 Standards for High Reliability Case: SOT23 Case Material: Molded Plastic. UL Flammability Classification Rating 94V-0 Moisture Sensitivity: Level 1 per J-STD-020 Terminals:.

FQP44N08J69Z : 44 A, 80 V, 0.034 ohm, N-CHANNEL, Si, POWER, MOSFET. s: Polarity: N-Channel ; MOSFET Operating Mode: Enhancement ; V(BR)DSS: 80 volts ; rDS(on): 0.0340 ohms ; Package Type: TO-220, TO-220, 3 PIN ; Number of units in IC: 1.

MP2130DG : 6 A SWITCHING REGULATOR, 1200 kHz SWITCHING FREQ-MAX, QCC12. s: Configuration / Function: Buck ; Package Type: Other, 2 X 2 MM, MO-220, QFN-12 ; Life Cycle Stage: ACTIVE ; IOUT: 6 amps ; VIN: 3.6 volts ; fsw: 1200 kHz ; Operating Temperature: -40 to 85 C (-40 to 185 F).

RC1218 : RESISTOR; JUMPER, METAL GLAZE/THICK FILM, 1 W, 1; 5 %, 100; 200 ppm, 1 ohm - 1000000 ohm, SURFACE MOUNT, 1218. s: Category / Application: General Use ; Technology / Construction: Thick Film (Chip) ; Mounting / Packaging: Surface Mount Technology (SMT / SMD), CHIP, HALOGEN FREE AND ROHS COMPLIANT ; Operating DC Voltage: 200 volts ; Operating Temperature:.

SSM6N44FE : 100 mA, 30 V, 2 CHANNEL, N-CHANNEL, Si, SMALL SIGNAL, MOSFET. s: Polarity: N-Channel ; MOSFET Operating Mode: Enhancement ; V(BR)DSS: 30 volts ; rDS(on): 7 ohms ; Package Type: ES6, 2-2N1D, 6 PIN ; Number of units in IC: 2.

67645-0002 : USB CONNECTOR,PCB MNT,PLUG,18 CONTACTS,SKT,SURFACE MOUNT TERMINAL,GUIDE SLOT. s: Applications: Telecom / Data / Network Connectors.